![]() ![]() The template of the Statement of Compliance for the fuel oil data report can be found in the IMO Resolution MEPC270(70) which can be downloaded here (see Appendix X). The standardized data reporting format can be found in the Guidelines for the development of a SEEMP (MEPC.282(70)) which can be download here (see Appendix 3). The fuel oil data report shall be submitted to the Flag Administration or any organization duly authorized by it for verification. ice class (if applicable), EEDI, DWT, NT, GT, ship type, IMO number, start and end dates.power output (auxiliary engine(s) and main propulsion power.method used to measure fuel oil consumption.The fuel oil data report requires the following elements: The template of the DCP can be found in the Guidelines for the development of a SEEMP (MEPC.282(70)) which can be download here (see Appendix 2).Īfter the end of the monitoring period (2018), every ship of 5000 GT or above shall prepare a fuel oil data report using a standardized data reporting format provided by IMO. The template of the Confirmation of Compliance of the SEEMP Part II (DCP) can be found in the MEPC.1/Circ.876 which can be downloaded here (see the Annex). Processes that will be used to report the data to the Administration.Ship engines and other fuel oil consumers and fuel oil types used.Record of revision of Fuel Oil Consumption Data Collection Plan. ![]() The DCP is very similar to the EU MRV Monitoring Plan but consists in only 9 sections: ![]() The DCP must be created within the Part II of the Ship Energy Efficiency Management Plan (SEEMP) and be available on-board the vessel. The DCP is a plan that describes the ship's particulars as well the procedures, systems and responsibilities used to monitor fuel consumption, hours underway and distance travelled. The DCP shall be prepared in accordance with the 2016 Guidelines for the Development of a Ship Energy Efficiency Management Plan adopted by Resolution MEPC.282 (70), shall be submitted to the Flag Administration or any organisation duly authorised by it by 1st September 2018 for a rview that must be completed by 31st December 2018.Ī Confirmation of Compliance is issued confirming the successful review of the DCP, which should be kept on board for the period of its validity. Starting from 1st January 2019, ships of 5,000 Gross Tonnage (GT) or above shall collect fuel consumption data, hours underway and distance travelled according to procedures, systems and responsibilities to be outlined in a Data Collection plan (DCP) within the Ship Energy Efficiency Management Plan (SEEMP) Part II. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |